Instrument panel indicators – Acura 2007 RL - Owner's Manual User Manual

Page 64

Advertising
background image

The instrument panel has many
indicators to give you important
information about your vehicle.

You will also see a ‘‘CHECK
EMISSION SYSTEM’’ message on
the multi-information display. For
more information, see page

.

The engine can be severely damaged
if this indicator flashes or stays on
when the engine is running, or if a
‘‘CHECK ENGINE OIL LEVEL’’
message is on the multi-information
display. For more information, see
page

.

If this indicator comes on when the
engine is running, the battery is not
being charged, and you will also see
a ‘‘CHECK CHARGING SYSTEM’’
message on the multi-information
display. For more information, see
page

.

This indicator comes on when you
turn the ignition switch to the ON
(II) position. It reminds you and your
passenger to fasten your seat belts.
A beeper also sounds if you have not
fastened your seat belt.

If you turn the ignition switch to the
ON (II) position before fastening
your belt, the beeper sounds and the
indicator flashes. If you do not fasten
your seat belt before the beeper
stops, the indicator stops flashing
but remains on.

If your front passenger does not
fasten their seat belt, the indicator
comes on about 6 seconds after the
ignition switch is turned to the ON
(II) position.

If either of you do not fasten your
seat belt while driving, the beeper
will sound and the indicator will flash
again at regular intervals. For more
information, see page .

You will also see a ‘‘FASTEN SEAT
BELT’’ or ‘‘FASTEN PASSENGER
SEAT BELT’’ message on the multi-
information display (see page ).

21

79

443

443

444

Instrument Panel Indicators

Low Oil Pressure
Indicator

Charging System
Indicator

Malf unction Indicator
Lamp

Seat Belt Reminder
Indicator

62

Main Menu

Table of Contents

Advertising