Protecting your discs – Acura 2007 RL - Owner's Manual User Manual

Page 236

Advertising
background image

When using CD-R or CD-RW discs,
use only high quality discs labeled
for audio use.

When recording a CD-R or
CD-RW, the recording must be
closed for it to be used by the disc
changer.

When a disc is not being played,
store it in its case to protect it from
dust and other contamination. To
prevent warpage, keep discs out of
direct sunlight and extreme heat.

A new disc may be rough on the
inner and outer edges. The small
plastic pieces causing this roughness
can flake off and fall on the
recording surface of the disc,
causing skipping or other problems.
Remove these pieces by rubbing the
inner and outer edges with the side
of a pencil or pen.

Never try to insert foreign objects in
the disc changer.

Handle a disc by its edges; never
touch either surface. Do not place
stabilizer rings or labels on the disc.
These, along with contamination
from finger prints, liquids, and felt-
tip pens, can cause the disc to not
play properly, or possibly jam in the
drive.

To clean a disc, use a clean soft cloth.
Wipe across the disc from the center
to the outside edge.

Play only standard, round, 5-inch
(12 cm) discs. Smaller or odd-
shaped discs may jam in the drive
or cause other problems.

Handle your discs properly to
prevent damage and skipping.

General Inf ormation

Protecting Discs

Protecting Your Discs

234

Main Menu

Table of Contents

Advertising