Multi-information display – Acura 2007 RL - Owner's Manual User Manual

Page 77

Advertising
background image

This shows the estimated distance
you can travel on the fuel remaining
in the fuel tank. This distance is
estimated from the fuel economy
you received over the last several
miles(U.S.) or kilometers (Canada),
so it will vary with changes in speed,
traffic, etc.

This shows the time passed traveled
since you last reset it. When you turn
the ignition switch to the ON (II)
position, ELAPSED TIME is reset.

You can customize the ELAPSED
TIME reset condition in the multi-
information display (see page ).

You can customize the Trip A and
AVG. FUEL A reset condition in the
multi-information display (see page

).

This shows your vehicle’s average
fuel economy in mpg (U.S. models)
or liter/100 km (Canadian models)
since you last reset the Trip A or
Trip B.

When you reset Trip A, AVG.
SPEED is also reset.

This shows the average speed you
are traveling in miles per hour (mph)
for U.S. models or kilometers per
hour (km/h) for Canadian models.

When the battery is disconnected, or
you refuel, RANGE is also reset.

The average fuel mileage will be
reset when you reset the trip meter,
or if the vehicle’s battery goes dead
or is disconnected.

When you turn off the engine, INST.
MPG or INST. L/100 km is also
reset.

This shows your current fuel
mileage.

Along with the trip meter, the trip
computer calculates these values:

Instantaneous fuel mileage
Range
Elapsed Time

Average Fuel Economy

Average Vehicle Speed

101

99

RANGE

ELAPSED TIME

AVG. FUEL A/B

AVG. SPEED

INST. MPG (U.S. models)/INST.
L/100km (Canadian models)

Trip Computer

Multi-Information Display

Inst

ru

m

e

nt
s

a

nd

Cont

ro

ls

75

Main Menu

Table of Contents

Advertising