Acura 2007 RL - Owner's Manual - Manual (Page 466)

Whenever tires are replaced, they
should be replaced with tires of the
same size. Following is an example
of tire size with an explanation of
what each component means.
Vehicle type (P indicates
passenger vehicle).
Tire width in millimeters.
Aspect ratio (the tire’s section
height as a percentage of its
width).
Tire construction code (R
indicates radial).
Rim diameter in inches.
Load index (a numerical code
associated with the maximum
load the tire can carry).
Speed symbol (an
alphabetical code indicating
the maximum speed rating).
The tire identification number (TIN)
is a group of numbers and letters
that look like the following example
TIN. TIN is located on the sidewall
of the tire.
The tires that came on your vehicle
have a number of markings. Those
you should be aware of are described
below.
Date of manufacture.
Tire type code.
Max Press The maximum air
pressure the tire can
hold.
Manufacturer’s
identification mark.
This indicates that the tire
meets all requirements of
the U.S. Department of
Transportation.
Max Load The maximum load the
tire can carry at
maximum air pressure.
P
R
V
DOT
FW6X
2202
245
50
17
98
B97R
Tire Labeling
Tire Size
Tire Identif ication Number
Maximum Tire Pressure
Maximum Tire Load
464
P245/50R17 98V
DOT B97R FW6X 2202
Main Menu Table of Contents