Setting spool pins, Presser foot lifter, Thread cutter – Kenmore 15343 User Manual
Page 20: Presser foot types
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Setting Spool Pins
@ Spool pin
The spool pins are used for holding the spools of thread
when feeding the thread to the machine.
To use, pull up the spool pins. Push down for storage.
Presser Foot Lifter
(T) Presser foot lifter
(2) Normal up position
@ Highest position
The presser foot lifter raises and lowers the presser.foot.
You can raise it about 1/4” (0.6 cm) higher thanitheinbrmal
up position for easy removal of the presser foot/ or io .heip.
place heavy fabric under the foot.
Thread Cutter
(T) Thread cutter
You do not
need
a
pair
of
.SGissorsTo
cut
threads
after
sewing. Simply use the builinn thréad cutter.
Advertising