Kenmore 15343 - Manual (Page 42)

Adjust the Needle Thread Tension for a
Zigzag Stitch
For an ideal zigzag stitch, the bobbin thread does not show
on the right side (Top side) of the fabric and needle thread
shows slightly on the wrong side (Bottom side) of the
fabric.
See the illustrations for correct appearance.
To match this appearance, adjust the needle tension.
• Correct tension
(T) Right side (Top side) of fabric
d) Wrong side (Bottom side) of fabric
Minimize the amount of needle thread visible on the
wrong side (Bottom side) of the fabric without causing
excessive puckering or causing bobbin thread to show or.
the right side (Top side) of the fabric.
Results vary with fabric, thread and sewing condition. : - .
►Tension is too iigrri
0 Right side (Top side) of fabric
(2) Wrong side (Bottom side) of fabric
The corner of each zigzag pulis togethg
(Top side) of fabric, ■' ■ ;(V i;; /'■
Oh the right side
(1)
► Tension is too loose . : :. :
0 Right side (Top side) of fabric
@ Wrong side (Bottom side) of fabric
Corner of each zigzag pulls together on the wrong side
(Bottom side) of fabric.