Replacing the light bulb, Warning, Cleaning the feed dogs – Kenmore 15343 User Manual
Page 58: Replacing the light bulb cleaning the feed dogs
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION Vil.CARE OF YOUR MACHINE
NOTE:
* Unplug the machine.
* Do not dismantle the machine other than as explained
in this section.
* Do not store the machine in a high-humidity area, near
a heat radiator or in direct sunlight.
* Clean the outside of the machine with a soft cloth and
mild soap.
Replacing the Light Bulb
WARNING:
As the light bulb could be HOT, protect your fingers when
you handle it.
Unplug the machine and remove the face cover. While
pushing the bulb up, turn it to the left (counterclockwise) to
remove. Put in a new bulb by pushing it up and turning it to
the right (clockwise).
Cleaning the Feed Dogs
Unplug the machine, and remoye the presser foot and
needle. Open the face coyer to allow room tOTemoye the;
needle plate screw wiih)a ecfewdriver. h : .v; : ■. j j ■.
Use a lint brush to clean the feed dogs.
Reattach the needle plate, pressure foot and needle.