Comtrol IOLM 4-EIP User Manual
Page 20
20 -
Chapter 3. Initial Configuration
IO-Link Master 4-EIP User Guide: 2000582 Rev. A
Using the Web Interface
3.
Click the EDIT button.
4.
Optionally, enter a host name to identify this IO-Link Master.
5.
Select the IP type, Static or DHCP.
•
If using a static IP address, enter the static IP address, subnet mask and IP gateway address.
•
If using DNS:
-
Enter the DNS primary server IP address.
-
Optionally, enter the DNS secondary server IP address.
6.
If you want the IO-Link Master to send syslog messages to a syslog server:
a.
Enter the syslog server's IP address (or host name if using DNS).
b.
Enter the syslog server's port number (default is 514).
7.
If you want to enable the SSH server, click Enable.
8.
Optionally, configure EtherNet/IP Specific Settings. You can refer to the help system for information about
these settings.