Updating application subassemblies – Comtrol IOLM 4-EIP User Manual
Page 29
IO-Link Master 4-EIP User Guide: 2000582 Rev. A
Chapter 4. Updating Images and Application Subassemblies - 29
Updating Application Subassemblies
6.
Click the Install button.
7.
Click the CONTINUE button to the Update Image message.
8.
Click Ok to close the Update Image Successful message.
4.3.2. Updating Application Subassemblies
Use this procedure to upload applications using the Software page.
1.
Download the latest application from the Comtrol Corporation ftp site.
2.
Open the IO-Link Master web interface using one of these method:
•
From PortVision DX, highlight the IO-Link Master and click the Webpage button or right-click the IO-
Link Master in the Device List pane and click Webpage.
•
Open your browser and enter the IP address of the IO-Link Master.
3.
Click ADVANCED and SOFTWARE.
4.
Click the Browse button (Choose File, depending on the web browser) under Update Application navigate to
the file location, highlight the image file, and click Open.