Comtrol IOLM 4-EIP User Manual

Page 9

Advertising
background image

IO-Link Master 4-EIP User Guide: 2000582 Rev. A

Chapter 2. Hardware Installation - 9

Connecting to the Network

3.

Optionally, you can use the other Ethernet port to daisy-chain to another Ethernet device.

4.

If you did not connect both Ethernet ports, make sure that screw on a connector cap, which was shipped
with the IO-Link Master to keep dust and liquids from getting in the connector.

Note: Ethernet ports must have an approved cable or protective cover attached to the port guarantee IP67

compliance.

Advertising