Comtrol ES8510-XTE - Manual (Page 101)

RocketLinx ES8510-XTE User Guide: 2000574 Rev. C SNMP V3 Profile- 101
Configuration Using the Web Interface
SNMP V3 Profile
SNMP v3 can provide more security functions when you perform remote management through SNMP
protocol. It delivers SNMP information to the administrator with user authentication; all of data between the
ES8510-XTE and the administrator are encrypted to ensure secure communication.
Note: You must Save the settings ( Page 123 ), if you want to maintain these settings if the ES8510-XTE is
powered off.
SNMP V3 Profile Page
User Name SNMP v3 user name.
Security Level
Select the following levels of security: None, Authentication, and
Authentication and Privacy.
Authentication Level
Select either MD5 (Message-Digest algorithm 5) or SHA (Secure
Hash Algorithm).
• MD5 is a widely used cryptographic hash function with a 128-
bit hash value.
• SHA functions refer to five Federal Information Processing
Standard-approved algorithms for computing a condensed
digital representation.
The ES8510-XTE provides two user authentication protocols in
MD5 and SHA. You need to configure SNMP v3 parameters for
your SNMP tool with the same authentication method.
Authentication
Password
Enter the SNMP v3 user authentication password.
DES Password Enter the password for SNMP v3 user DES Encryption.
Add Click to add an SNMP v3 user.
SNMP V3 Users
This table provides SNMP v3 user information.
Click Remove to remove a selected SNMP v3 user.
Click Reload to reload SNMP v3 user information.