Comtrol ES8510-XTE - Manual (Page 57)

RocketLinx ES8510-XTE User Guide: 2000574 Rev. C Backup and Restore - 57
Configuration Using the Web Interface
Backup and Restore
You can use the Backup option to save the current configuration saved in
the ES8510-XTE flash to a PC/laptop or a TFTP server.
This allows you to use the Restore option to restore a configuration file
back to the ES8510-XTE or load the same settings to another
ES8510-XTE. Before you can restore a configuration file, you must save
the backup configuration file in the PC or TFTP server. The ES8510-XTE
then downloads this file back into the flash.
The ES8510-XTE configuration file is a standard text file. You can open
the file with WordPad or Notepad. You can also modify the file, add/
remove the configuration settings, and then restore the file back to the
ES8510-XTE.
There are two modes to backup and restore the configuration file on the
web page:
• Local File
Note: If you have a Windows operating system above Windows XP, you can use the TFTP Server method,
the CLI, PortVision DX, or apply exclusions for Java for the Windows firewall to backup or restore
configuration files.
PortVision DX supports saving and loading configuration files, without any Windows operating
system firewall restrictions.
• TFTP Server
Backup & Restore Page
Backup
Configuration
• Local File: The ES8510-XTE acts as the file server, see Backup the Configuration - Local
File Method on Page 58.
• TFTP Server: The ES8510-XTE acts as a TFTP client, see Backup the Configuration -
TFTP Server Method on Page 60.
Note: Pointing to the wrong file causes the entire configuration to be skipped.
Backup Backup can only backup the configuration file to your PC or a TFTP server.
Restore
Configuration
You can select local file or TFTP server to restore the startup configuration. For procedures,
see
Restore the Configuration - Local Method on Page 59 or Restore the Configuration -
TFTP Server Method on Page 61.
Restore Click to restore ES8510-XTE startup configurations to the ES8510-XTE.
Backup
Configuration
• Local File: The ES8510-XTE acts as the file server, see Backup the Configuration - Local
File Method .
• TFTP Server: The ES8510-XTE acts as a TFTP client, see Backup the Configuration -
TFTP Server Method .
Note: Pointing to the wrong file causes the entire configuration to be skipped.
• The ES8510-XTE provides a default configuration file in the ES8510-XTE. To load the default
configuration file, you can use the Reset on the
Load Default page on Page 63 or the Reload command in
the CLI ( Page 142 ).
• You can use the CLI to view the latest settings running in the ES8510-XTE. The information are the
settings you have configured but have not yet saved to the flash. The settings must be saved to the flash
in order to work after a power recycle. Use the running-config command to view the configuration file, see
Show Running Configuration on Page 142.
• After you save the running-config to flash, the new settings are kept and work after the power is cycled.
Use the show startup-config to view it in the CLI. The Backup command can only backup the
configuration file to your PC or TFTP server.