Comtrol ES8510-XTE - Manual (Page 86)

86 - VLAN Configuration RocketLinx ES8510-XTE User Guide: 2000574 Rev. C
Configuration Using the Web Interface
VLAN Configuration
Use this page to assign the Management VLAN, create the static VLAN, and assign the Egress rule for the
member ports of the VLAN.
Ingress
Filtering
Ingress filtering instructs the VLAN engine to filter out undesired traffic on a port.
• When you Enable Ingress Filtering, the port checks whether the incoming frames
belong to the VLAN they claimed or not. The port then determines if the frames can
be processed or not. For example, if a tagged frame from TEST VLAN is received,
and Ingress Filtering is enabled, the ES8510-XTE determines if the port is on the
TEST VLAN’s Egress list. If it is, the frame can be processed. If it is not, the frame is
dropped.
• When you select Disable, the port accepts all incoming frames regardless of its VLAN
classification. This control does not affect VLAN independent BPDU frames, such as
Super Ring, STP, GVRP and LACP. It does affect VLAN dependent BPDU frames,
such as GMRP.
Apply
Click Apply to apply the settings.
Note: You must Save the settings ( Page 123 ), if you want to maintain these settings if
the ES8510-XTE is powered off.
VLAN Port Configuration Page (Continued)