Installing portvision dx – Comtrol ES8510-XTE User Manual
Page 17
RocketLinx ES8510-XTE User Guide: 2000574 Rev. C
Installing PortVision DX - 17
Using PortVision DX
Installing PortVision DX
During initial configuration, PortVision DX automatically detects and identifies ES8510-XTE switches, if they
are in the same network segment.
Use the Software and Documentation CD that came with the ES8510-XTE to check for the latest version of
PortVision DX or use the link below to download the latest version.
1.
Locate PortVision DX using one of the following methods to download the latest version:
•
Software and Documentation CD: You can use the CD menu system to check the version on the CD
against the latest released version.
•
FTP site subdirectory:
ftp://ftp.comtrol.com/rocketlinx/portvision_dx
.
Note: Depending on your operating system, you may need to
respond to a Security Warning to permit access.
2.
Execute the PortVision_DX[version].msi file.
3.
Click Next on the Welcome screen.
4.
Click I accept the terms in the License Agreement and Next.
5.
Click Next or optionally, browse to a different location and
then click Next.