Comtrol ES8510-XTE User Manual
Page 88
Advertising
88 - VLAN Configuration
RocketLinx ES8510-XTE User Guide: 2000574 Rev. C
Configuration Using the Web Interface
This figure displays how to configure the Egress rule of the ports.
Use the following steps to configure Egress rules:
1.
Select the VLAN ID. The entry of the selected VLAN turns to light blue.
2.
Assign Egress rule of the ports to U or T.
3.
Press Apply to apply the setting.
If you want to remove one VLAN, select the VLAN entry and then click the Remove button.
Advertising