Introduction – Comtrol ES8510-XTE User Manual
Page 7
RocketLinx ES8510-XTE User Guide: 2000574 Rev. C
Introduction - 7
Introduction
The ES8510-XTE is a managed industrial Ethernet switch that is equipped with ten 10/100BASE-TX ports,
which supplies three Combo ports that provide:
•
Copper RJ45 Ethernet ports (10BASE-T and 100BASE-TX)
•
SFP slots (100BASE-FX)
When the SFP port is active and installed on a Combo port, the corresponding Combo RJ45 port is
inactivated. For example, if an SFP transceiver is installed and active on the 8SFP port, the corresponding
RJ45 Port 8 becomes inactive.
The embedded software supports full Layer 2 networking features. In addition, the ES8510-XTE provides ring
redundancy, network control, security, and alert features. Security is enhanced with advanced features such
as IEEE 802.1Q VLAN and port/IP security. Performance is optimized by QoS and IGMP Snooping/Query.
Redundant Ring technology enables superb self-healing capability for network failure and it also provides an
advanced redundant network solution; Ring Coupling and Rapid Dual Homing technology. Ring Coupling and
Rapid Dual Homing technology means that an Ethernet Ring can be extended more easily whether with
Comtrol switches or other managed switches. Event warnings can be sent to the network administrator by
email or system log and to field engineers by relay output.
The ES8510-XTE has rugged aluminum housing and was designed for industrial environments. The
ES8510-XTE provides a wide operating temperature and is NEMA TS2 certified.
Detailed specifications are available for the
ES8510-XTE
.
on Page 37 for web user interface features.