Private vlan (cli) – Comtrol ES8510-XTE User Manual
Page 161
RocketLinx ES8510-XTE User Guide: 2000574 Rev. C
Private VLAN (CLI) - 161
Configuration Using the Command Line Interface (CLI)
Private VLAN (CLI)
A private VLAN helps to resolve the primary VLAN ID shortage, client ports’ isolation and network security
issues. The Private VLAN features provides primary and secondary VLANs within a single switch.
Primary VLAN: The uplink port is usually a member of the primary VLAN. A primary VLAN contains
promiscuous ports that can communicate with Secondary VLANs.
Secondary VLAN: The client ports are usually defined within secondary VLAN. The secondary VLAN
includes Isolated and Community VLANs. The client ports can be isolated VLANs or can be grouped in the
same Community VLAN. The ports within the same community VLAN can communicate with each other,
however, the isolated VLAN ports cannot.
Optionally, you can use the web user interface for configuration, see
The following table provides detailed information about command lines for private VLAN port configuration,
VLAN configuration, and VLAN table display.
Private VLAN Configuration
Create VLAN
Switch(config)# vlan 2
vlan 2 success
Switch(config-vlan)#
end End current mode and change to enable mode
exit Exit current mode and down to previous mode
list Print command list
name Assign a name to vlan
no no
private-vlan Configure a private VLAN
Private VLAN Type
Choose the Types
Primary Type
Isolated Type
Community Type
Go to the VLAN you want configure first.
Switch(config)# vlan (VID)
Switch(config-vlan)# private-vlan
community Configure the VLAN as an community private VLAN
isolated Configure the VLAN as an isolated private VLAN
primary Configure the VLAN as a primary private VLAN
Switch(config-vlan)# private-vlan primary
<cr>
Switch(config-vlan)# private-vlan isolated
<cr>
Switch(config-vlan)# private-vlan community
<cr>