Futaba 8UHFS, 8UHPS - Manual (Page 10)

7
Specifications and ratings are subject to change without notice.
• 8UA Transmitter, including RF module
• R148DP/DF Receiver, R138DP/DF, or R149DP Receiver
• Servos, four S148 , four S3001, one S3001, or four S9001, with mounting hardware and
servo arm assortment
• Switch harness
• Aileron extension cord
Transmitter T8UAFS/T8UAPS (Aircraft
Version)
Operating system: 2-stick, 8 channels,
PCM1024 system
Transmitting frequency: 29, 35, 36, 40, 41, 50,
60 or 72 MHz bands
Modulation: FM/PPM or PCM, switchable
Power supply: 9.6V NT8S600B Ni-Cd battery
Current drain: 250 mA
Receiver R148DP/DF (PCM or FM
Dual conversion)
Receiving frequency: 29, 35, 36, 40, 41, 50,
60 or 72 MHz bands
Intermediate freq.: 10.7 MHz and 455 kHz
Power requirement: 4.8V Ni-Cd battery
Current drain: 14 mA
Size: 2.19 x 1.00 x 0.89” (55.5 x 25.5 x
22.5 mm)
Weight: 1.07 oz (30.4 g)
Servo S148 (Standard)
Control system: Pulse width control, 1.52 ms
neutral
Power requirement: 4.8V (from receiver)
Output torque: 41.7 oz-in (3.0 kg-cm)
Operating speed: 0.22 sec/60°
Size: 1.59 x 0.78 x 1.41” (40.4 x 19.8 x 36 mm)
Weight: 1.5 oz (42.5 g)
Servo S3001 (Standard, ball-bearing)
Control system: Pulse width control, 1.52
ms neutral
Power requirement: 4.8V (from receiver)
Output torque: 41.7 oz-in (3.0 kg-cm)
Operating speed: 0.22 sec/60°
Size: 1.59 x 0.78 x 1.41” (40.4 x 19.8 x 36
mm)
Weight: 1.59 oz (45.1g)
• Memory module – the optional DP-16K
doubles your model storage capability (to 16
models from 8) and allows you to transfer programs to another 8UA transmitter.
• Transmitter battery pack – the NT8S600B transmitter Ni-Cd battery pack may be easily
exchanged with a fresh one to provide enough capacity for extended flying sessions
• Trainer cord – the optional training cord may be used to help a beginning pilot learn to fly
easily by placing the instructor on a separate transmitter. Note that the 8UA transmitter may
be connected to another 8UA system, as well as to any F5, Skysport, Super 7, or 9Z series
transmitter.
• Neckstrap – a neckstrap may be connected to your 8UA system to make it easier to handle
and improve your flying precision, since your hands won’t need to support the transmitter’s
weight.