Futaba 8UHFS, 8UHPS - Manual (Page 90)

86
→ →
The Throttle
→Needle mixing function is used to control the engine’s mixture using a 5-
point curve relative to throttle stick movement . The engine must be equipped with a
mixture control system, such as needle control or some other mixture adjustment, and the
needle servo must be plugged into CH8. The CH8 knob may be used for High-side mixture
adjustment when the idle-up (IDLE) function is ON.
You can have independent control of throttle
→needle mixing in both the Normal
(NORM) and idle-up (IDLE) conditions. The TH
→NDL function includes an ‘acceleration’
function that precedes rapid throttle opening and provides the engine with the best mixture.
Setting Throttle
→Needle Mixing
function
To GOVrpm
function
Curve Name
Display
(NORM
or IDLE)
Data input keys
These keys are used to
move around in the
TH-NDL function.
1. Turn the TH-NDL function ON
by pressing the (+) key ("ON"
displayed). Turn off (INH) the
function with the (-) key.
2. Input 5-point curve values
Move the lower arrow to the
position you want to set with the
CURSOR keys (the curve point is
indicated by the arrow below the
numbers 1-5, and the current
throttle position is above the
numbers). Enter the desired curve
value with the (+)/(-) keys.
• If you're unhappy with what you've
set, you may return to the default
value by pressing the (+) and (-)
keys simultaneously.
Initial values:
POS1 = 0%
POS2 =25%
POS3 = 50%
POS4 = 75%
POS5 = 100%
Curve Point
Value
(Range: 0 -
+100%)
Move between the TH-NDL
NORM and IDLE screens
with the (
↑)(↓) keys.
The bottom arrow shows the point on
the five-point curve currently being set.
The blinking item on the
setting screen is the
current setting item.
Top arrow indicates the
current stick position (2
arrows means it's
between points)
Curve points 1-5
To INVERT or
TH-NDL NORM
Acceleration amount
Range: 0 to 100%
(Initial value: 0%)
3.Acceleration function setting
Enter the desired acceleration value with the (+)/(-) keys.Return to
a 0 % value by pressing the (+)/(-) keys simultaneously.
Acceleration is only mixed in when the throttle is moved towards
High. If Throttle Hold is activated, the needle servo moves and
acceleration is performed even though the throttle servo is fixed.
Idle-up functions are performed when the throttle curve idle-up
function is ACTivated.