Futaba 14MZ - Manual (Page 52)

●Return to Linkage Menu
● Touch the [Model Select] button in the Linkage Menu to call the setup screen shown below.
Model Select The Model Selection function performs model addition, call, deletion, copy,
and model name setting.
This function is used to load the settings of the
desired model into the T14MZ’s memory.
The settings may be selected from either the
transmitter’s built-in memory or a Data-Pack
CFDP32M (Compact Flash card; 32MB). Remember
that up to 30 model memories are available in the
transmitter; these may be stored in the CFDP32M card.
The name of the model stored in the transmitter and
the Data-Pack may be changed. This can be very useful
to tell different models settings apart. Each model name
can be as long as 32 characters, and the model name
always appears in the display screen.
The Copy function is used to copy one set of model
data into a second memory within the transmitter and
the Data-Pack. It may be used for getting a head-start
on setting up models with almost the same settings (only
differences need to be modifi ed, instead of entering the
complete model from scratch). Also, this function may
be used to make a backup copy of a model setup before
any changes are made.
(The display screen is an example. The screen depends on the model type.) (Model list)
Model call
1. Touch the "Save to" icon, and select the
location to which the desired model is to be
saved.
Transmitter icon: Transmitter memory
Data pack icon: CF card
2. Touch the desired model in the model list.
3. Touch the [Select] button.
4. Touch [Yes] to call the model. (When you
want to cancel model call, press [No].)
Model addition
1. Touch the [New] button.
2. Touch [Yes] to add the model. (When you
want to cancel model addition, touch [No].)
*When a new model is added, the Model Type screen and
Frequency screen are automatically displayed. Check or
change the model and frequency. If there are no changes,
touch the Model Type and Frequency icons.
*The added model is displayed in the model list.
Model deletion
1. Touch the "Save to" icon or the model you
want to delete in the model list. (The model
currently selected cannot be deleted.)
2. Touch the [Delete] button.
3. Touch [Yes]. (When you want to stop model
deletion, touch [No].)
Model name change
1. Select the model by touching the "Save to"
icon or the desired model in the model list.
2. When [Change Name] is touched, a
keyboard appears on the screen.
3. Enter the model name from this keyboard.
*Up to 32 characters can be input at the model name.
Japanese language input is also possible.
(For a detailed description of the input method, see "User
Name Registration/Character Input Method" of the Basic
Operation section.
Model copy
1. Touch the [Copy] button to call the Copy
screen.
2. Touch the "Source" button and select the
model to be copied.
3. Touch the "Destination" button and select the
copy storage destination. (Transmitter or CF
card)
4. Touch the center [Copy] button.
5. When [Yes] is touched, copying is executed.
(When you want to cancel copying, touch
[No].)
*If there is no model of the same name at the copy
destination, the name of the copy source is saved. If there
is a model of the same name, a number is appended to the
end of the model name and the model is copied. Change the
name later.
●"Save to"
52 <Linkage Menu>