Futaba 14MZ - Manual (Page 73)

● Return to Model Menu
● Touch the [Condition Select] button in the Model
Menu to call the setup screen shown below.
Condition Select Flight conditions addition, deletion, copy, condition renaming, and condition
delay can be set. [All model types]
The functions in the Model Menu can be used by
switching the settings of up to 8 flight conditions
by using the Condition Select function to add fl ight
conditions. Add conditions, as required.
When you do not want to use the Condition
Select function, this setting is unnecessary. In
this case, use the flight conditions (Condition 1)
assigned at initial setting.
● Since switching by stick and lever position, in
addition to ordinary toggle switch, is possible
as the flight condition selector switch, this
function can be linked with other operations.
● A Condition Delay function can be set.
Unnecessary fuselage motion generated
when there are sudden changes in the servo
positions and when there are variations in
the operating time between channels during
condition switching can be suppressed. The
delay can be set for each channel.
When setting the delay function at the
s w i t c h i n g d e s t i n a t i o n c o n d i t i o n , t h e
related function changes after a delay
corresponding to the set amount.
● When multiple conditions were set, their
operation priority can be freely changed.
● The condition name can be changed. The
selected condition name is displayed on
the screen. When a condition has been
added, give it a name which can be easily
confi rmed.
(Conditions List)
Priority change
1. Touch the condition whose priority
you want to change in Conditions
List.
2. Change the priority with the
priority [ ] or [ ] button. (The last
condition has the highest priority.)
*The initial setting condition cannot be
moved. It has the lowest priority.
Condition Addition
1. When the [Add] button is touched, the
Condition Select screen appears.
*Only the number of buttons corresponding to the
conditions which can be added are displayed.
2. Select the desired conditions by touching
the buttons.
*The selected conditions are added to Conditions
List.
3. Touch the [NULL] button to call the
<Switch> screen.
4. Select the switch to be used in condition
switching and its ON direction.
(For a description of the switch selection method,
see [Switch Setting Method] at the back of this
manual.)
5. The "Condition 1" data for the added
conditions is copied.
Condition Reset
1. Select the condition
b y t o u c h i n g t h e
condition you want to
reset in Conditions List.
2. Touch the [Reset]
button.
3. When the [Yes] button
i s t o u c h e d , t h e
condition is reset. (To
abort resetting, touch
the [No] button.)
Condition Renaming
1. Select the condition by
touching the condition
you want to rename in
Conditions List.
2. Touch the [Rename] button.
3. Enter the new name from
t h e k e y b o a r d w h i c h
appears on the screen. (For
a description of the method
of using the Japanese
l a n g u a g e c o n v e r s i o n
mode, see "Characters
Input Method" of the Basic
Operation section.)
3. When the keyboard [Return]
key is touched, the new
name is registered. (To
abort registration, touch the
[ESC] key.)
Condition Copy
1. Touch the [Copy] button. The Copy screen appears.
2. Select the condition by touching the button of the
copy source conditions.
3. Next, select the condition by touching the copy
destination condition.
4. Touch the [COPY] button.
5. When the [Yes] button is touched, the data is
copied. (To abort copying, touch the [No] button.)
(Currently selected condition name)
●Condition delay
setting
(For a description of
the setting method,
see the next page.)
73 <Model Menu (Common Functions)>