Futaba 14MZ - Manual (Page 55)

●Return to Linkage Menu
● Touch the [Picture] button in the Linkage Menu to call
the setup screen shown below.
Picture A picture can be pasted for each model. (Simplifies identification of the model data
during screen operation.)
A photograph of the model taken with a digital
camera or other file can be pasted as the screen
display data for each model. This is convenient in
identifying models with the same model name.
*The picture fi les which can be displayed on the screen are
size 168 x 80 pixels, fi le type .bmp (bit map picture) fi les. If
a fi le larger than this is pasted, the top left-hand side of the
picture is displayed.
*Paste the picture after saving the picture data from your PC
to the accessory CF card and inserting the CF card into the
transmitter.
When a picture is pasted, it is displayed as the
following screen image:
●Model Select screen
●Home screen
●Startup screen
Pasting of picture
*Picture data is pasted to the model memory currently in use.
1. Select the picture from the fi le list by touching
the desired picture data.
*Before selection, touch the scroll button at the top or bottom
of the fi le list and confi rm the contents of the picture fi les
saved on the CF card at the preview screen.
2. To paste the picture, touch [Yes]. (When you
want to cancel pasting, touch [No].)
[Important]
Before reading data from the PC, insert the CF
card into the transmitter and turn on the power.
The following folders are automatically written.
To read a file from the PC, copy the file to a
folder by fi le type.
●BMP: Picture fi le ●WAV: Audio fi le
●WMA: Music fi le ●MODEL: Model data
55 <Linkage Menu>