Interlogix Simon XT Tabletop User Manual - Manual (Page 10)

4 Simon XT TableTop Control Panel User Manual
Communicating with your system
You can send commands or instruct your security system through a series of
keypresses on the panel, touchpads, or a remote telephone.
Table 2: System communication devices
Device Description
Control panel You can enter commands for your security system through simple
keypresses on the panel. Depending on how your system is programmed,
you may need to enter an access code for certain commands. An access
code is a numeric code that allows authorization to operate your security
system.
Handheld
Touchpad This touchpad gives you the option to enter commands from any room in
your house. You can enter commands through simple keypresses on the
touchpad.
Simon XT
TableTop
Touchpad This touchpad gives you the option to enter commands from any room in
your house. You can enter commands through simple keypresses on the
touchpad.
Keyfob Keyfobs are handy for simple arming, disarming and light control functions.
They are portable and can be carried offsite in a purse or pocket.
Telephone Touchtone telephones can be used to communicate with your system while
you are offsite. Ask your installer if you have this feature.
Note: The default master code is 1-2-3-4 when the security system is shipped
from the factory. You should change your code after your system is installed. See
Code options on page 24.