Interlogix Simon XT Tabletop User Manual - Manual (Page 16)

10 Simon XT TableTop Control Panel User Manual
Leve
l Function Description
3 Arm motion sensors —
interior
This level allows you to arm the interior motion sensors, while
leaving the exterior door and window sensors disarmed.
4 Arm doors/windows and
motion sensors
—both
This level allows you to arm all sensors.
Arming/disarming
Arming a sensor makes it active and allows the panel to generate an alarm when
a door or window is opened, or when an unauthorized person enters a specific
area. Disarming makes the sensor inactive in the system. The current arming
level is shown on the panel display and changes in arming level are announced
on the speaker.
Subdisarm
To subdisarm, do the following:
1. Enter the master code while the system is disarmed.
2. The panel displays and speaks Subdisarmed, the Disarm button blinks, and
the panel beeps once.
3.
When you’ve finished accessing the temporarily unprotected areas, press
Disarm to return to Disarmed.
Disarm (off)
To disarm, do the following:
1. Press Disarm, then enter your code when the panel displays Enter code.
2. The panel displays and speaks Disarmed, the Disarm button lights up, and
the panel beeps once.
Arming doors and windows
To arm the doors and windows, do the following:
1. Ensure that all doors and windows are closed.
2. Press Doors+Windows, then enter your code when the panel displays Enter
code, if a code is required.
3. The panel displays Doors+Windows, speaks Doors and windows on, and the
Doors+Windows button lights up.
4. The panel starts an exit delay, and sounds exit beeps in groups of two until
the exit delay expires.