Interlogix Simon XT Tabletop User Manual - Manual (Page 42)

36 Simon XT TableTop Control Panel User Manual
3. Scroll up/down to Piezo beeps, then press Enter.
4. The current value of this option now flashes. Scroll up/down to toggle this
option on/off, then press Enter.
5. Press Status repeatedly to exit.
Panel voice
Panel voice (spoken phrases on the speaker) and keypress sounds from the
speaker heard while controlling the system). This option determines whether or
not the panel speaks status messages and arming level changes.
To program panel voice, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Siren options, then press Enter.
3. Scroll up/down to Panel voice, then press Enter.
4. The current value of this option now flashes. Scroll up/down to toggle this
option on/off, then press Enter.
5. Press Status repeatedly to exit.
Panel piezo alarms
Loud alarms on the siren. This option determines whether or not the panel
sounds alarm beeps.
To program panel piezo alarm, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Siren options, then press Enter.
3. Scroll up/down to Panel piezo alarm, then press Enter.
4. The current value of this option now flashes. Scroll up/down to toggle this
option on/off, then press Enter.
5. Press Status repeatedly to exit.
Status beep volume
This option sets the sound volume of nonalarm beeps. The numerical range is 1
to 10. The default value is 7.
To program status beep volume, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Siren options, then press Enter.
3. Scroll up/down to Status beep vol, then press Enter.