Interlogix Simon XT Tabletop User Manual - Manual (Page 21)

Simon XT TableTop Control Panel User Manual 15
Light control (optional)
The panel lets you control lights and appliances using lamp, appliance, or
universal modules. You can:
• Turn lights with unit numbers 1 to 8 on or off manually or at a specific time.
• Turn on lights when a sensor is tripped. You can program lockout times when
sensor- activated lights won’t be active.
To turn on all of the lights that are controlled by lamp modules, press the * button
twice. The panel display will show All Lights On. To turn off all lights that are
controlled by lamp modules, press the # button twice. The panel display will show
All Lights Off. To turn on or off individual lights:
• To turn on a light with unit number N (1 to 8), press the * button, then <N>.
The panel displays and speaks Light <N> On.
• To turn off a light with unit number N (1 to 8), press the # button, then <N>.
The panel displays and speaks Light <N> Off.
Chimes
Use the chime feature to signal when a protected door is opened while the
system is disarmed. The panel chimes twice when a chime sensor is tripped, if
the chime mode is enabled. This feature allows you to be notified when family
members are going in and out of your home. The chime and special chime
features are turned on or off in the system menu.
Note: If there are no chime sensors in your system, the chime option will not
appear in the System menu.
Voice chime
Your installer may have programmed the system to speak the sensor name or
make a custom chime sound when a chime sensor is tripped. The chime sound,
if programmed, will be played in place of the standard chime beeps.
Special chime
Special chime allows you to install motion sensors in a patio or at the front door,
and be notified when someone is approaching those areas. These motion
sensors are not used for intrusion protection. The panel will chime three times, if
the special chime mode is enabled.
Note: If there are no special chime sensors in your system, the special chime
option will not appear in the System menu.