Interlogix Simon XT Tabletop User Manual - Manual (Page 45)

Simon XT TableTop Control Panel User Manual 39
4. The current option value (A to O) now flashes. Scroll up/down to the desired
value, then press Enter.
5. Press Status repeatedly to exit.
Sensor-activated light lockout time
Each light (unit numbers 1 to 8) that has been tied to a sensor can be
programmed not to turn on during a certain time of day.
To program the lock interval, do the following:
1. Enter the System programming menu.
2. Scroll up/down to Light control, then press Enter.
3. Scroll up/down to Lock interval, then press Enter.
4. Scroll up/down to the unit number for which you want to program a lockout
time, then press Enter.
5. The current option value now flashes. Program the start and end times (see
Light schedules on page 33).
6. Press Status repeatedly to exit.