Your floorplan, Sensor and module locations – Interlogix Simon XT Tabletop User Manual User Manual
Page 54
Advertising
48
Simon XT TableTop Control Panel User Manual
Note: Do not mount the alarm to the metal runners of suspended ceiling grids.
The metal runners can draw the magnet’s field away from the alarm’s reed switch
and cause a false tamper alarm.
Figure 5: Smoke detector locations
Your floorplan
Use the following guidelines when drawing your floorplan:
• Show all building levels.
• Show exits from each room (two exits per room are recommended).
• Show the location of all security system components.
• Show the location of any fire extinguishers
Sensor and module locations
Use Table 13 on page 49 and Table 14 on page 50 to list your sensor and
module locations.
Advertising