Interlogix Simon XT Tabletop User Manual - Manual (Page 17)

Simon XT TableTop Control Panel User Manual 11
Arming motion sensors
To arm the motion sensors, do the following:
1. Press Motions, then enter your code when the panel displays Enter code, if a
code is required.
2. The panel displays Motions, speaks Motions on, and the Motions button
lights.
3. The panel starts an exit delay and sounds exit beeps in groups of three until
the exit delay expires.
Arming doors, windows, and motion sensors
To arm the doors, windows, and motion sensors, do the following:
1. Press Doors+Windows, then enter your code when the panel displays Enter
code, if a code is required.
2. While the panel is in the process of arming, press Motions.
3. The panel displays Doors+Windows & Motions, speaks Doors and windows
on, motions on, and the Doors+Windows and Motions buttons light up.
4. The panel starts an exit delay and sounds exit beeps in groups of four until
the exit delay expires.
Exit/entry delay
The panel provides a delay after entering or exiting your home before the system
is alarmed. Table 5 below provides details for the entry and exit delay features.
Table 5: Entry and exit delay details
Function Description
Entry delay Some active sensors cause immediate alarms when tripped. Other sensors, if
enrolled in a delayed response group, start an entry delay that lets you enter the
premises and disarm the system. If the system has not been disarmed by the end
of the entry delay, the alarm occurs.
No delay If the system was armed with the no delay feature activated, there will be no entry
delay and the alarm will occur immediately.
Exit delay When the user arms the system, an exit delay starts. During the delay the user
can vacate the premises through a delayed response door without causing an
alarm.
Protest
during
arming The system may protest an arming level change if certain abnormal conditions
exist. If a sensor that is active in the requested arming level is open, the system
sounds protest beeps and automatically bypasses the open sensor (depending on
system configuration).