Interlogix NVR 20 User Manual - Manual (Page 106)

100 TruVision NVR 20 User Manual
interacts via the network with the TVN 20. Listed below are these settings, the
available options and the recommended defaults:
Field Name Default
Setting Available
Selections Explanation
Protocol Type TCP - TCP
- UDP
Controls how Live/Preview streaming is
managed to the Browser computer. The
recommended setting is TCP.
The Transfer File
Size for
Live/Preview
Cameras to the
Browser
Computer 256M - 128M
- 256M
- 512M
Defines the file size for any Live/Preview
video that is manually recorded to the
Browser computer. The recommended
setting is 256M.
Stream Type Main stream - Main stream
- Sub stream
Only applies to Live/Preview viewing on the
Browsing computer when the IP camera
supports both a Main stream and a Sub
stream. If the Sub stream is used, this can
render a lower quality image that uses less
network bandwidth. If a Sub stream is not
supported for the camera, then the Main
stream is automatically used. The
recommended setting is Main stream.
Network
Transmission
Feature Best Fluency - Shortest Delay
Mode
- Less Delay,
Good Fluency
- Less Delay,
Good Fluency
- Best Fluency
This defines the quality optimization for the
Live/Preview stream to the TVN 20. The
values go from fastest update to the
smoothest display quality.
The recommended setting is Best Fluency.
Display Mode Full - Full
- 4:3
- 16:9
- Adjustable to
resolution
Controls the rendering of video on the
Browsing computer based upon the display
connected to the remote computer. The
recommended setting is Full.
If you make changes to the default settings, press Save to retain the new
settings. If you want to restore the factory default settings for the Browser
computer settings, press the Reset button.