Interlogix NVR 20 User Manual - Manual (Page 40)

34 TruVision NVR 20 User Manual
Figure 21: The Copy to… dialog box
Step 9: Final Steps for Recording Schedules – Motion
Detection Trigger
In order for Motion Recording to be possible, motion detection must be enabled
on the desired cameras.
This is a simple two-step process:
1. Enable Motion Detection on the IP Camera.
2. Define the activation schedule for the IP Camera motion detection trigger.
For select IP Cameras, the TVN 20 can configure motion detection areas
(regions of interest) within the TVN Browser. For the other IP cameras, the
TVN 20 incorporates a link to the IP camera’s web page to enable configuring
motion detection directly on the IP Camera.