Interlogix NVR 20 User Manual - Manual (Page 99)

TruVision NVR 20 User Manual 93
To configure the system responses to these events:
1. Navigate to the Exceptions Parameters page from Main Browser Page:
Click Config > under Remote Config area, select Configuration
parameters and then select the Exceptions Parameters option in the
Navigation window.
2. From the Exception Type drop-down list select the desired system event you
wish to configure.
3. From the Alarm Handling Method area, please select the notification options
desired (Audio Warning etc.)
4. If Trigger Alarm Output is selected, then from Analog Alarm Output tab,
select one or more of the on-the-box outputs to trigger (A->1 thru A->4).
5. Repeat the steps 2-4 above for each additional Exception Type element you
wish the system to respond to.