Interlogix NVR 20 User Manual - Manual (Page 114)

108 TruVision NVR 20 User Manual
6. Enter the User Name and Password associated with the service agency you
set up with
7. Reconfirm the password under the Confirm Password field
8. Enter the Domain name assigned to you be the service agency for your
domain access for the TVN 20 across the Internet.
9. Click Save to retain your settings.
To view or change the PPPoE settings:
1. Navigate to the PPPoE Settings page from Main Browser Page: Click Config
> under Remote Config area, select Configuration parameters and then
under Network Parameters select the PPPoE Settings option in the
Navigation window.
2. To enable PPPoE, click the Enable PPPOE checkbox.
3. Enter the User Name and Password associated with your device on the
Domain identified under the DDNS settings..
4. Confirm your password in the Confirm Password field.
5. Click Save to retain your settings.