Interlogix NVR 20 User Manual - Manual (Page 33)

TruVision NVR 20 User Manual 27
 Any bitrate target set for these cameras is only a target and the effective
bandwidth can be 10-20% above the target and depends on the IP
Camera manufacturer and the amount of scene activity.
Constant Bitrates
 Use this when it is important for predictable network performance and
limiting the impact of video on the network.
 Under CBR, the data rate does not exceed the set limit.
Troubleshooting
What do I do if the selected IP camera is not fully configurable from the TVN 20?
As stated previously not all cameras that can connect to the TVN 20 support full
configuration from the TVN 20. On-Screen Display (OSD), some frame rate and
encoding parameters and video motion detection may only be configurable using
the IP Camera Manufacturer’s web page.
From the main Config page (REMOTE), in the listing of the IP camera, the user
can directly launch the IP Camera Manufacturer’s web page by clicking on the IP
address.
Figure 19: IP camera information page
You can now finish configuring the desired elements not available in the TVN 20.
Note: If a feature is configurable in the TVN 20, then configure it from the
TVN 20. The setting in the TVN 20 will overwrite any changes made directly to
the IP Camera via the Manufacturer’s browser.
Step 7: Setting Up Recording Schedules - Introduction
The TVN 20 supports a robust set of scheduling capabilities which include
normal and event recording with up to 8 time periods per day. Recording
schedules can be copied across every day of the week and to multiple cameras
for fast entry. Recording schedules interact with the available encoding profiles.