Interlogix NVR 20 User Manual - Manual (Page 113)

TruVision NVR 20 User Manual 107
PPPoE & DDNS Settings
These two settings are frequently used together whenever a User is attempting
to view the device via a broadband internet connection.
 DDNS define an internet service group that provides User with fixed
network addresses so a connection to the device across the internet can
be reliably achieved.
 PPPoE settings are used to access an internet service provider from
things such as an ADSL modem.
To view or change the DDNS settings:
1. Navigate to the DDNS Settings page from Main Browser Page: Click Config
> under Remote Config area, select Configuration parameters and then
under Network Parameters select the DDNS Settings option in the
Navigation window.
2. To enable DDNS services, click the checkbox Enable DDNS.
3. Under Protocol Type, select from the drop-down list the protocol for the
service agency you set your account up with the listed sites are:
• NO-IP
• DynDNS
• PeanutHull
4. Enter the name of the service agencies server in the Server Name field.
5. In some cases the server will use a specific port assigment, please enter this
as required under Port: