Juniper Systems Allegro MX User Guide - Manual (Page 13)

Battery Settings Options
The New Battery Detected screen has four choices:
Same battery, use last values
Full battery
Charge unknown
Enter percentage and capacity
Use Same Battery if the Field PC was turned off and back
on or if the battery was taken out and re-inserted without
being recharged, this option uses the information the
unit already has for the battery setting.
Use Full Battery if the battery is fully charged.
Use Charge Unknown if you do not know the charge of the
battery.
Note: The battery gauging will not be accurate with Charge
Unknown until the battery is fully charged. The battery icon
may not display the percentage of charge correctly.
Use Enter percentage and capacity if you know the charge or
if it is a new battery pack.




Ch 2 Battery and Power
13