Juniper Systems Allegro MX User Guide - Manual (Page 36)

36
Field PC Owner’s Manual
Enter text using Block Recognizer. This utility recognizes
letters from single strokes.
Use Transcriber, a program that allows you to enter data
using cursive, print, or mixed handwriting.
Note: For more details about using each input method, go to Start >
Settings > Input and choose the input method from the Input window.
When you are ready to enter text, you can switch from the
default input method (keyboard) by following these steps:
1. On the bottom center of the screen, tap the arrow next to
the input method icon (shown). If the input selector arrow
is not displayed, tap the input method icon.
2. The input method menu appears. Tap the input method
you want from the list of options.
3. Using the selected input method, enter your text.