Juniper Systems Allegro MX User Guide - Manual (Page 30)

30
Field PC Owner’s Manual
PC Cards
A PC card can be used to expand the memory and peripheral
capabilities of the Field PC. The PC card slot is also capable of
taking an SD or CF card with an adapter (optional accessory
for CF cards).
Installing a PC Card
To install a PC card complete the following steps:
1. Use a screwdriver to open the back compartment door.
2. Insert the card into the slot socket-first with the front of the
card facing up. Gently push it in until it stops.
3. Close the door to the card slot and reattach the back
compartment door.
Note: Be careful when inserting and removing cards. Excess force
could damage the card and the card drive.
Removing a PC Card
To remove a PC card follow the steps outlined above in reverse
order. For step 2, push the eject button, grasp the card firmly
and pull it out.
Micro SD Cards
A Micro SD card holder is located at the back of the unit.
CAUTION: Installing a card improperly can result in damage to
the unit not covered by the warranty.
!!