Juniper Systems Allegro MX User Guide - Manual (Page 61)

4. Send data from the device to the Field PC. The Field PC
receives the data.
To send data from your Field PC to a Bluetooth device, follow
these steps:
1. Make sure the device is discoverable. (For instructions, see
the user documentation that came with your device.)
2. On the Field PC, make sure Bluetooth is on.
3. In File Explorer, tap and hold on the name of the file you want
to transfer, then choose Beam File from the menu that appears.
4. When the name of the device becomes visible, tap on the name.
5. On the Bluetooth device, accept the file. The file is transferred.
More Information about Bluetooth
For more information on Bluetooth profiles visit
http://bluetooth.com.
Ch 6 Bluetooth Wireless Communications
61