Juniper Systems Allegro MX User Guide - Manual (Page 72)

72
Field PC Owner’s Manual
Reattach the bezel by inserting the top ridge and lowering the
bezel down flat onto the case. Press down along the sides while
aligning the keys through the holes.
Note: After you reattach the bezel, check each key to make sure
it is completely free from the bezel. If any part of a key is caught
underneath the bezel, you may not be able to turn the Field PC on or
you may hear a continuous string of beeps.
Cleaning the Touchscreen
To clean the touchscreen of the Field PC, complete the
following steps:
1. Press the BLUE shift key + TS (BkSp) key to disable the
touchscreen.
2. Use a clean cotton cloth to wipe off the screen.
Note: Do not use anything abrasive that could scratch the screen
(including tissues and paper towels).
3. Press the BLUE shift key + TS (BkSp) key to enable the
touchscreen.