Juniper Systems Allegro MX User Guide - Manual (Page 42)

42
Field PC Owner’s Manual
Applications and Task Manager
Close Running Programs
The Task Manager can be used to close unused programs
to free memory on the device. We recommend closing any
programs you are not using.
Note: Tapping on the in the top right corner of a program only
minimizes the program; the program continues to run in the background.
To close one or more running programs, follow these steps:
1. Go to Start > Programs > Task Manager.
2. Select the program(s) you want to close.
3. Tap End Task.
Switching Between Running Programs
To switch between programs running on your Field PC, follow
these steps while within the applications manager:
1. Select the program you want to switch to.
2. Tap the Menu soft key and then Switch To. The program
comes to the forefront.
Viewing Memory Allocation for Programs
To see how much memory is available for programs and storage
on the Field PC, go to the applications manager by either clicking