Juniper Systems Allegro MX User Guide - Manual (Page 69)

Storing the Field PC for More than Two Weeks
To protect the Field PC during storage periods of two weeks or
more, complete the following steps:
1. Charge the battery to full capacity (100%).
2. Close all running programs and turn off the Field PC.
3. Remove the battery pack.
4. Place the battery pack in a dry location.
Taking your Field PC out of Extended Storage
While storing the battery pack, it naturally discharges slightly
while inactive. When you are ready to use your Field PC
after storing it for an extended period of time, complete the
following steps:
1. Insert the battery pack.
2. Turn on your Field PC.
3. Enter 10% on the Battery Settings pop up screen.
4. Tap on the Accept button to save the new setting.
5. Plug your Field PC into the external AC wall charger and
charge the battery pack in your Field PC for at least 6 hours.
Ch 8 Care and Maintenance
6