Juniper Systems Allegro MX User Guide User Manual
Page 54
Advertising
54
Field PC Owner’s Manual
Serial Device (COM) Control Panel
To set up a Bluetooth COM port, follow these steps:
1. Select the Start > Settings > Connections > Bluetooth COM
option. The following Bluetooth COM configuration screen
is shown. Select Discover Devices.
2. A list of discovered devices is shown. Select the device
you want to connect to from the list and tap Connect. A
COM port is automatically assigned for the device. You can
change it to another COM port.
3. The Field PC automatically tries to discover the PIN. You
might be required to enter a PIN.
Advertising