Conair B32 - Manual (Page 10)

The control is mounted on the front of the I/O station. Inside
is a processor with base, containing up to 8 input/output mod-
ules. The number of input and output modules will vary with
the number of vacuum receivers and conveying options. W
HAT IS THE
B32?
Basic 32 Loader Control UGC007/0702
2-2
D
ESCRIPTION
T
YPICAL
A
PPLICATIONS
Backup
Pump
Pump
System 1
Pump
System 2
Pump
System 4
Pump
System 3
Pump
System 5
Pump
System 6
Pump
System 8
Pump
System 7
B32
The Basic 32 has been designed for basic conveying applica-
tions.
Loader-pump assignments are completely flexible. Individual
vacuum receivers can be assigned to any one of the eight
loading systems. Each receiver can be configured for one of
the following:
l Single-material loading.
l Ratio loading, with or without automatic material layering.
l Positive (air-operated) receiver discharge.
l Material line purging.
l Loader fill alarm to work with an optional fill sensor
mounted in the receiver body or direct feed chamber.
l Hopper fill alarm to work with an optional demand sensor
mounted in a drying hopper or other material vessel.
l No alarm.
The controller and control automatically turn on when power
is applied to the I/O station. After a bootup sequence the home
screen displays. From the home screen the operator can scroll
to all monitoring and control functions.