Conair B32 - Manual (Page 31)

UGC007/0702 Basic 32 Loader Control
O
PERATION
4-7
A
SSIGNING
L
OADERS AND
P
UMPS
You may need to change loader and pump assignments to
match the conveying system vacuum and XXXX
To assign loaders and pumps from the main screen:
Use the Up/Down arrows to scroll to
Loader Config.
Press the Enter arrow.
The Loader Configuration screen displays. Use
the up/down arrows to scroll to Pump Assign.
Press the Enter arrow.
The Pump Assignment screen displays. Use the
up/down arrows to choose the loader number.
Use the scroll down/up buttons to choose the
pump number.
Press the Enter arrow to save the change.
Press the Previous button to return to
the last screen you were viewing, or the Main
button to return to the Main screen.
1
2
3
4
5