Conair B32 - Manual (Page 40)

When a conveying problem occurs, the screen displays the
alarm message and the audible alarm sounds.
To silence the alarm and fix the problem:
Press the Enter button.
This acknowledges the alarm. The alarm text is
removed from the screen. The screen returns to the Main
screen. NOTE: pressing the Enter button only acknowl-
edges the alarm; it does not fix the problem.
View Alarm list.
From the Main screen use the Up/Down arrows to
scroll to Loader Settings. Press Enter. The Loader
Settings screen displays.
Use the Up/Down arrows to scroll to
Alarm List. Press Enter to display alarms. The
alarm list displays up to 25 alarms, starting with the
most current. All acknowledged alarms have a check
mark
next to the text. All alarms show the hour, minute and
second the alarm occurred. Alarms are automatically
removed from the list when the condition is corrected.
Fix the problem.
Refer to the diagnostic tables in this section and any man-
uals supplied with this device to determine the cause of
the problem and to repair the problem.
Press Main button to return to main screen
or the Previous button to return to the last screen
viewed.
C
LEARING
I
NTERFACE
A
LARMS
Basic 32 Loader Control UGC007/0702
6-4
T
ROUBLESHOOTING
1
2
3
4
5