Conair B32 - Manual (Page 24)

S
ELECTING A
P
ASSWORD
Basic 32 Loader Control UGC007/0702
3-12
I
NSTALLATION
The B32 provides password security to prevent unauthorized
changes to loader or system settings.
Use the Up/Down arrows to scroll to
System Config. Entering the System Configuration
screen requires a Supervisor 2 password.
Enter the password.
To enter the password use the up/down arrows to
scroll through the alphanumeric list. When the cor-
rect letter/number is highlighted use the right Select arrow
to move to the next digit. Continue until the whole pass-
word is selected. The initial passwords are set at the fac-
tory:
● Supervisor 1: 7373
● Supervisor 2: 54647
Change these passwords and record the new passwords in
a safe place.
Press the Enter arrow.
The Factory Configuration screen displays. Use the
scroll up/down buttons to scroll to the New field.
Use the up/down arrows to scroll through the alphanu-
meric list. When the correct letter/number is highlighted
use the right Select arrow to move to the next digit.
Continue until the whole password is selected.
Press the Enter arrow.
The Password Administration screen displays. Use
the up/down arrows to scroll through the alphanu-
meric list. When the correct letter/number is highlighted
use the right Select arrow to move to the next digit.
Continue until the whole password is selected.
Press the Enter arrow to accept the
password.
Press the Main button to return to the
main screen.
1
2
3
4
5
6