KERN & SOHN DLT 100-3N - Manual (Page 14)

14 DLT_N-BA-e-1421
6.2 Unpacking and placing
1. Drying unit
Take the instrument carefully out of its packaging, remove the plastic jacket and
install it at the designated work space.
The instrument is supplied part-assembled. Immediately after unpacking check if the
delivered items are complete. Assemble the separate component parts according to
their sequence.
1. Windshield
2. Sample dish holder
3. Removal aid
4. Sample dish
1. Put windscreen in sample chamber.
2. Carefully put sample dish holder on top.
3. Position removal aid in a way that the handle fits under the groove of the
cover.
4. Put sample dish on the dish holder.