KERN & SOHN DLT 100-3N - Manual (Page 45)

DLT_N-BA-e-1421 45
Selectable parameters:
 Variation: 0.1 - 10.0%
 Time unit: 1 – 99 s
To import press <OK>.
4. Absolute auto stop This switch-off criterion is based of the
weight loss (mg) per time unit.
Measurement is finished, when the set
weight value per time unit is lower than
the nominal value, both values being
freely adjustable [mg / sec].
Tap < Autostop absolute >.
Tap loss of weight (variation absolute) or
time unit and enter desired value.
Selectable parameters:
 Weight loss: 1 - 60 mg
 Time unit: 1 - 99 s
To import press <OK>.