KERN & SOHN DLT 100-3N - Manual (Page 30)

30 DLT_N-BA-e-1421
8 Simple weighing / taring
In order to obtain exact weighing results, the integrated balance must have
reached its operating temperature (see warming up time chap. 1).
8.1 Weighing:

Ensure weighing mode

Wait for zero display, reset to zero using
0/T.

Place goods to be weighed on balance.

Wait until the stability display appears
[ ].

Read weighing result.
8.2 Taring:
1. Put weighing container on the weighing pan.
2. Wait until the stability display (
) appears, then tap 0/T button.
3. After standstill control the zero display appears. The weight of the container is
now internally saved.
4. Weigh the material.
5. Wait until the stability display appears (
).
6. Read net weight.
8.3 Default tare (pre tare)
Where the tare weight is known, you can enter this numerically.

Tap control button .

Enter known tare weight (such as 17 g) and import by pressing <OK>.
The weight display will show the negative tare weight.

To delete pre tare, enter “0”.